Recording From A Tape - Sony LBT-XB8AV Operating Instructions Manual

Recording from a
tape
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(CrO ) tapes. The recording level is
2
automatically adjusted.
POWER
3 1
1
Press 6 EJECT and insert a
recorded tape in deck A and a blank
tape in deck B.
With the side you want to
play/record on facing forward
ª ª
p 0 )
6
2
Press H SPEED DUB.
Deck B stands by for recording.
3
Press DIRECTION repeatedly to
select A to record on one side or
ß (or RELAY) to record on both
sides.
4 1 2
p
ª ª
p 0 )
P r
6
4
Press P.
Dubbing starts.
When dubbing ends, decks A and B
automatically stop.
To stop dubbing
Press p on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION to ß when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• You don't have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
Note
You cannot record the surround effect.
21