Introduction; Basic Characteristics Of Biopel Mini Series Boilers - Opop Biopel MINI Installation And Operation Instructions Manual

1.

INTRODUCTION

To correctly install, start and operate this boiler from the Biopel series, read this manual step by step, from chapter 1 onwards
and proceed chronologically so that none of the steps necessary for the correct boiler operation are omitted during installation
and commissioning. Chapters describe first boiler installation, then chronologically accessories connection and activation and
boiler maintenance. Chapters describe first boiler installation, then chronologically accessories connection and activation and
boiler maintenance.
The latter half of the manual provides examples of heating system wiring and accessories, including a description of the settings
in the control unit. If one or more accessories are connected to the boiler, use this information to properly set-up the
accessories properly so boiler operation will be in in accordance with user manual.
If you require additional information regarding the boiler function or boiler-controlled components, please do not hesitate to
contact a certified installer or an OPOP representative directly.
2.

BASIC CHARACTERISTICS OF BIOPEL MINI SERIES BOILERS

Biopel MINI boilers are produced in several sizes according to their maximum power, from 11 to 40 kW. The control system of
these boilers allows to regulate all control elements of heating systems. The control unit is equipped with many advanced
features, ensuring its adaptation to the customer's needs. In addition, it allows the connection of many additional devices that
simplify the boiler operation and add additional superior features.
The Biopel MINI boiler control unit enables:
 Control of 2 mixing valves.
 Connection of 2 room thermostats to control 2 separate heating circuits.
 Connection of 5 pumps - central heating pump (CH pump), hot water pump (DHW), valve pump 1, valve pump 2, pump
with independently configurable settings.
 Equithermal control based on outdoor temperature.
 Time control of boiler outlet temperature - programmable weekly operation mode.
 Heating of storage tank by 2 temperature sensors.
 Online control of all boiler and heating circuit functions via OPOP web interface.
 Mobile application for iOS and Android phones, allowing remote boiler management and the entire heating system.
 Control unit firmware update via USB interface to get new functions.
 DPCh - operation error detection. The unit displays error and operation messages on the main panel, which are also
stored in the Main Settings, Activity History. By clicking on an operating error, you can view a detailed description of the
problem and how to solve it.
In addition, the Biopel boiler's v9 MINI control unit allows connection of a wide range of additional devices, which makes boiler
maintenance more automatic or add new control options:
 RT10 room thermostat, displaying information of the entire heating system.
 Compressor cleaning of boiler burner and exchanger, extending significantly the need for manual boiler and burner
maintenance.
 Automatic ash removal, extracting ash from the boiler into an external container, extending the intervals between boiler
ashtray cleaning.
 Lambda sensor, allowing automatic correction of the combustion process by measuring the remaining oxygen inside the
boiler.
 GSM module, with which you can receive boiler status reports via SMS. Use in case your boiler cannot be connected to
the internet and regulated online.
 S8-Wifi module, allowing control of thermostatic radiator heads. Each room is thus heated as a separate zone with its
own room temperature. Therefore, this device ensures optimum heat consumption and keeps heating costs to a
minimum.
 Vacuum feeder, transporting pellets from silo to the boiler hopper over long distances.
 Cascade controller, allowing you to operate up to 4 boilers connected together in one boiler room and use their power
according to the current requirement of the heating system.
Biopel MINI - Installation and Operation Instructions
4