Sony CMT-ED1A Operating Instructions Manual page 5

3 Attach the speakers.
Facing the front of the unit, attach the
speaker connected to the SPEAKER R
jack onto the right side of the unit and
the speaker connected to the
SPEAKER L jack onto the left side of
the unit.
3
Set VOLTAGE SELECTOR to the
position of your local power line
voltage (except for North American
model.)
220-240V
VOLTAGE SELECTOR
110-120V
4
Reinstall the rear cover.
Put the wires through the hole at the
bottom of the rear cover.
5
Turn the unit upside down holding
the glass door with firm hand and
set the speaker cord into a groove of
the unit.
6
Connect the power cord to a wall
outlet.
Note on the glass door of CD player
The CD player cover of the CMT-ED1 is made of
tempered glass.
Under normal conditions, this tempered glass is
more shock resistant and able to bear more
weight than ordinary glass. This glass, however,
may shatter if it receives a sharp blow or if it is
scratched.
To detach the speakers
1 Slide the speakers in the opposite
direction of the arrows of the
illustration in "Attach the speakers"
(see step 2 -3 on this page.)
2 After detaching the speakers, set the
speaker cords into the speaker cord
groove at the bottom of the speaker.
Otherwise, the speaker cord could be
damaged.
Groove
5