Page 2
Refer building, as close to the point of cable to them whenever you call upon your Sony entry as practical. dealer regarding this product. Model No. CMT-T1...
Table Chapter 1: Setting Up Connecting the Stereo 4 Inserting the Batteries 6 Setting the Clock 6 Contents Chapter 2: the CD Player Playing a CD (normal play) 7 Playing Tracks in Random Order (shuffle play) 8 Playing Tracks in the Desired Order (program play) 8 Playing Tracks Repeatedly (repeat play) 9 Chapter 3: the Radio Listening to the Radio 10...
Chapter 1: STEP 2 Connecting the Connecting the Right Speaker Setting Stereo Connect the right speaker to the tuner CD player with the audio cord (supplied) and Use the illustrations below to connect your house current lead. stereo. Connecting the audio cord STEP 1 Connecting the Connect firmly the white plug to the white...
Page 5
AM loop antenna (supplied) FM lead antenna (supplied) Tuner CD player Right speaker Stereo cassette deck STEP 4 STEP 3 STEP 1 STEP 2 Left speaker STEP 5 AC power cord to the wall outlet Speaker cable (supplied) AC power Audio cord (supplied) Flat cord (supplied) ! Do this connection last !
2, 3, 4 ENTER Battery life You can expect the remote to operate for about six months using Sony SUM-3 (NS) batteries Press TIMER SET. before the batteries run down. When the batteries no longer operate the remote, replace Press TIMER+ or – to display “CLOCK”...
Chapter 2: To find the beginning of a track – Automatic Music Sensor (AMS) Playing a CD You can locate the beginning of a track the CD (normal play) while the track is playing or while it is in pause mode. You can play CDs in four modes: normal, Player To locate the beginning of the current or...
Press (. All the tracks you chose play in the Playing Tracks in Playing Tracks in the order you designated. Random Order Desired Order To cancel the program play (shuffle play) (program play) Press TUNING/PLAY MODE until “PGM” disappears. You can play all the tracks on the CD in You can program up to 24 tracks to play in To change the program random order.
Playing Tracks Repeatedly (repeat play) You can choose between two different repeat play modes. One repeats all the tracks in the current play mode; the other repeats a single track. Use the buttons on the remote to do this operation. Tuner CD Player POWER →...
Chapter 3: If you do not want to listen to the station selected, press TUNING +/– Listening to the again to restart the scan. Radio When the desired station is not tuned in You can have the tuner automatically scan Radio Automatic tuning may skip a station with a and tune in the stations with clear signals.
To erase a stored station To change the frequency display to Store a new station on the preset channel the preset channel display Presetting Radio number of the station you want to erase. During listening to a preset radio station, Stations This will erase the old station and replace it press DISPLAY on the remote.
Chapter 4: When listening to a tape recorded with the Dolby* B-type noise reduction Playing a Tape system the Tape Slide the DOLBY NR switch to ON. You can use TYPE I (normal), TYPE II Dolby noise reduction system reduces tape (CrO ) and TYPE IV (metal) tapes.
Slide DIRECTION to select dual or When the track order has been programed Press FUNCTION repeatedly until the single-sided recording. and the total length of the tracks to be source you want to record appears in recorded is shorter than the length of one the display.
Press 6 EJECT on the deck and insert a blank tape. Recording a CD in a Specified Track Order Slide DIRECTION to select dual or single-sided recording. (program edit) To record on one side, set to A. To record on both sides*, set to a. You can adjust the total recording time to * Recording always stops at the end of the the tape length while making a program.
Chapter 5: Adjusting the Reinforcing Bass Sound Balance of the (DBFB) Speakers DBFB (Dynamic Bass Feedback) feature Adjustment intensifies low frequency sound for richer You can adjust the balance of the sound bass reproduction. from the speakers to correct the stereo You can select one of the two levels of imaging when the speaker position is not DBFB: “DBFB1”...
Listening with the Surround Feature With this feature, you can create the atmosphere of a movie theater or concert hall. Select one of the two levels of the Surround feature: “SURR1” and “SURR2”. “SURR2” is more effective than “SURR1”. Tuner CD Player POWER →...
Chapter 6: Falling Asleep to Waking Up to Music Additional Music You can wake up to music at the preset time. You only need to set the timer once. You can set the stereo system to turn off The preset timer activates at the same time Features automatically so you can go to sleep to every day.
continued To check the timer settings Press BAND repeatedly until the band Press TIMER SELECT until “DAILY” you want appears in the display. disappears and appears in the display Set the time you want the music to come again. Press TUNING/PLAY MODE until The preset items appear sequentially.
Insulated wire Connect the PC/MD IN/OUT jacks (phono (not supplied) jacks) on the rear panel of the stereo to an MD, DAT, VCR deck, etc. with the Sony Earth wire (not supplied) RK-C315 connecting cord (not supplied). Connecting cord RK-C315 (not supplied), etc.
TV set. However, colour irregularity concerning your stereo system, please may still be observed on the TV screen consult your nearest Sony dealer. depending on the type of your TV set. On safety If colour irregularity is observed...
The CD will not play. A stereo FM program cannot be To clean the cabinet m The CD is dirty. received in stereo. Use a soft cloth slightly moistened with m The CD is inserted label side m When "MONO" appears in the mild detergent solution.
Supplied accessories 1 kohm AM loop antenna (1) PHONES (headphones) jack: Sony RM-ST1 Remote (1) Stereo mini jack, accepts Sony SUM-3 (NS) batteries (2) headphones of 8 ohms or more. FM lead antenna (1) Speaker cable (1) General Audio cord (1)