Table of Contents
Advertisement
Troubleshooting
Disruptions
Signifi cant abnormal
vibrations
Carbon rod breakage
Noise in the pole
The machine will not
start
Unexpected machine
stoppages
26
Causes
Incorrect comb assembly
Incorrect comb tightening
Incorrect rod tightening
Comb wear
Defective tool detection
Wear
Damaged pole guidance
Battery discharged
red steady
Machine not powered
Other
Too strong pushes
Mechanical jams
fl ashing red
Battery discharged
red steady
Solutions
Refi t the comb following the
procedure, and contact the
dealer if necessary.
Re-tighten the comb following
the procedure.
Re-tighten the rods following the
procedure.
Check that one of the combs
does not have any play or is not
damaged and contact the dealer
if necessary.
Contact your dealer.
Replace the broken and/or worn
rod.
Contact your dealer.
Charge the battery.
Reconnect it.
Contact your dealer.
Change the work method or ask
your dealer for advice. Restart by
pressing the trigger once.
Charge the battery.
Advertisement
Table of Contents
