Table of Contents
Advertisement
Recording tips
–– Marking track numbers/Smart
Space/Adjusting the recording
level
Tips
• You can use the ALBUM dial on the recorder
instead of the <, ,, or ENTER button on the
remote to select and enter items in Edit Menu or
Setup Menu.
To select an item: Turn the ALBUM dial towards
+/–.
To enter a selection: Press the ALBUM dial.
• You can also use the ALBUM +/– buttons instead of
the </, buttons to select items in Edit Menu or
Setup Menu.
Marking track numbers
automatically while
recording (Level Synchro
Recording)
You can number tracks automatically while
recording a CD inserted in the recorder. By
marking track numbers at specific points, you
can quickly locate the points later or edit the
HDD easily.
However, tracks may not be automatically
numbered when you record from an external
device through the DIGITAL OPTICAL IN
connector, or when there is noise in the sound
source being recorded (e.g., tapes or radio
programs recorded through the ANALOG IN
connector).
When recording from an external device, do the
following procedure to add track numbers
automatically. A track number is added
whenever the input signal level drops below the
trigger level for about 1.5 seconds or more and
then rises above it again.
Notes for Level Synchro Recording
• When recording from an external device connected
to the DIGITAL OPTICAL IN connector, the entire
material might be recorded as a single track.
• When recording from an external device connected
to the ANALOG IN jacks with "Tr.Mark Off"
selected or when recording from a DAT deck or
DBS tuner connected to the DIGITAL OPTICAL
IN connector, the entire material may be recorded
as a single track.
1
While the recorder is stopped or
recording pause, press MENU/NO.
"Setup Menu" appears in the display.
2
Press </, repeatedly until
"Tr.Mark Lsync" appears in the display,
then press ENTER or YES.
3
Press MENU/NO.
"L.SYNC" appears in the display.
The recorder marks a track number
whenever the input signal level drop to the
trigger level for Level Synchro Recording
or below for at least 1.5 seconds.
To turn off the Level Synchro
Recording function
Select "Tr.Mark Off" in step 2.
continued
15
Advertisement
Table of Contents
