Playable Discs; Getting Started; Inserting Batteries Into The Remote - Sony HAR-LH500 Operating Instructions Manual

Hard disc audio recorders
Table of Contents

Advertisement

Playable discs

You can play back the following discs on this
recorder. Other discs cannot be played back.
List of playable discs
Format of
Disc logo
discs
Audio CDs
CD-R/
CD-RW
Discs that this recorder
cannot play
• CD-ROMs (PHOTO CDs included)
• CD-Rs/CD-RWs other than those recorded
in the music CD format
Notes on CD-R and CD-RW
• This recorder can play CD-R/CD-RW discs
edited by the user. However, note that
playback of some discs may not be possible
depending on the recording device used for
recording or the disc condition.
• CD-R and CD-RW discs that have not been
finalized (processing to allow play by a
normal CD player) cannot be played.
• CD-R and CD-RW discs recorded in multi-
session mode are not supported.
Music discs encoded with copyright
protection technologies
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware
that among those discs, there are some that do
not conform to the CD standard and may not be
playable by this product.
6

Getting Started

Inserting batteries into
the remote
Contents
Audio
Audio
You can control the recorder using the supplied
remote.
Insert two R6 (size AA) batteries by matching
the + and – on the batteries to the diagram
inside the battery compartment.
Insert the negative (–) end first, then push in
and down until the positive (+) end clicks into
position. When using the remote, point it at the
remote sensor
Notes
• Do not leave the remote near an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Tip
When the remote no longer operates the recorder,
replace both batteries with new ones.
on the recorder.

Advertisement

Table of Contents
loading

Table of Contents