STEP 2: VEHICLE PREPARATION MATERIAL CHECK LIST SUPPLIED NOTE: Using an automotive hoist is recommended for an easier access and safety. ITEM PART NO. DESCRIPTION QTY. SINGLE QTY. DUAL TO SUIT ANTENNA ASSEMBLY AND CONNECTOR 6009263 #8-32 x ½ SK HD, SS 6010210 #8 LOCK-WASHER, EXT-TOOTH 8003384...
STEP 3: ANTENNA INSTALLATION STEP 4: CABLE ROUTING 3.1 Once location has been determined fasten the antenna housing with the 4 self-tapping screws 4.1 Route the input cable through the engine compartment and firewall into the vehicle where the to the vehicle frame. radio is located.
DUAL ANTENNA CABLE ROUTING STEP 5: ANTENNA TUNING 5.1 Using a VNA follow the tuning procedure below and measure at the end of the input cable NOTE: For the rear antenna installation refer to STEP 3 before connecting to the radio. 5.2 A VNA or Vector analyzer will give you performance results for specific frequency ranges bandwidth and is a best choice for tuning the antenna.