Safety Caution Grounding the Terminal In urban areas, ground the terminal with a grounding conductor in accordance to national and local electrical codes. Danger FCC Radio Frequency Exposure Information for Mobile Transmitting Devices When the power is on, maintain an off-axis safety distance of 0.7 meters (2.3 feet), where “off axis”...
List of Contents - Case 1 NAME QUANTITY DESCRIPTION Leg Assembly Pedestal mounting base Pedestal Assembly (ODU) Antenna main pedestal optionally integrated with BUC and LNB Reflector Hub Reflector petal mounting base Reflector Petals Disassembled antenna reflector Feed Horn Horn antenna with waveguide Mounting Pegs Stake for leg assembly IFL Cable (optional) Interfacility link cable for Tx/Rx transmission BUC M&C Cable (optional)
1. Overview The Norsat Wayfarer is an industrial strength transportable satellite communication system built strong for the most demanding users working with the most challenging applications and environments. The Wayfarer is manually operated, integrated, and versatile enough for deployment virtually anywhere, including mobile field offices, field vehicles, or directly on the ground. A complete satellite solution, the Wayfarer includes everything to meet your communication needs.
3. Hardware 3.1. Case Dimensions CASE NUMBER DIMENSIONS WEIGHT Case 1 (Pelican iM 2975) 31.30 in x 20.40 in x 15.50 in ≤ 66 lb [30 kg] [795 mm x 518 mm x 394 mm] 3.2. Antenna Dimensions Note: Pictures within the user manual may differ from the product. Top view of antenna (mm): DOC-000898 Rev B 07/2020...
3.3. Introduction to System Components The Pedestal Assembly consists of three main modules: The Azimuth, Elevation, and Polarization modules. Please refer to Section 5.3 for the operation of each module. The azimuth module consists of the azimuth handwheel, planetary gearbox, worm gearbox, internal gear and azimuth base.
Page 14
4. Take out the Pedestal Assembly from Case 1 5. Lift the Pedestal by the top handle and insert the Azimuth Connector into the Leg Assembly. Note: The Pedestal Assembly can be installed in any orientation on the Leg Assembly at this step. Handle Azimuth Connector Lock Handle Disengaged...
6. Install the remaining petals in increasing order by performing the steps below: a. Adjust the elevation angle as needed to access the hub-side latches. b. Insert the locating stub on the petal into the mating slot in the Reflector Hub and any adjacent petals. c. Engage all petal-side latches. d. Engage all hub-side latches. Note: If the polarization assembly is blocking the hub-side latches, refer to Section 5.3.3 to adjust the position of the polarization assembly.
5. Operation 5.1. Levelling 1. Loosen the locking nut on the foot to be adjusted Foot Adjustment Knob Locking Nut 2. Examine the location of the bubble in the Bubble Level on the Pedestal. 3. Decrease the height of the footpad(s) closest to the bubble and/or increase the height of the footpad(s) farthest to center the bubble.
5.3. Adjusting Antenna Position 5.3.1 Azimuth Adjustment 1. Use the lower handwheel to control the azimuth position of the terminal. a. Rotate the handwheel CW to move the azimuth to the left b. Rotate the handwheel CCW to move the azimuth to the right 2.
6.3. Reflector 1. Detach Petals 3 through 6 in decreasing order by performing the following steps. a. Firmly graph the petal throughout with at least one hand throughout. b. Disengage all petal-side latches. c. Disengage the hub-side latches. d. Gently pull away the reflector from the Reflector Hub. Petal-Side Latch Hub-Side Latch Foam Spacer 2.
Page 26
4. Store the Pedestal Assembly in Case 1. 5. Unlock the buckle strap on the Leg Assembly. 6. Collapse the Legs to the limit and re-engage the buckle strap. 7. Store the Leg Assembly in Case 1. 8. Adjust the footpad heights as needed to fit into the case. DOC-000898 Rev B 07/2020...
8. System Maintenance 8.1. Maintenance Schedule DESCRIPTION FREQUENCY Inspect and clean integrity of Feed Horn window, replace Once per month when damaged Inspect OMT and waveguide sealing, if there is a leakage, dry Once per month out the components and seal with silicon fusion tape or replace damaged parts Inspect screws and nuts, tighten or replace screws upon Once per month...
Page 32
ABOUT NORSAT Norsat International Inc., founded in 1977, is a leading provider of innovative communication solutions that enable the transmission of data, audio and video for remote and challenging applications. Norsat’s products and services include customizable satellite components, portable satellite...