1500 Array Subwoofer
BASIC TROUBLESHOOTING
If there is low (or no) bass output
•
Make sure the connections to the left and right "Speaker
Inputs" have the correct polarity (+ and –).
•
Make sure the subwoofer is plugged into an active electrical
outlet.
•
Make sure the Power Switch is on.
•
In Dolby Digital or DTS modes, make sure your
receiver/processor is configured so that the subwoofer
and LFE output are enabled.
•
Adjust the Subwoofer Level Control
7
Need help?
Do you have a question about the Project Array 1500 and is the answer not in the manual?