Sony PCWA-DE30 Troubleshooting Manual page 7

Case 3 - When starting the Converter Setup Utility, the IP
Address Setup dialog box appears
If communication cannot be established with the current IP address of the
computer connected to the Wireless LAN Converter and the IP address of the
Wireless LAN Converter, the IP Address Setup dialog box appears.
To establish communication, proceed as follows:
1 Verify that the IP address of the Wireless LAN Converter is acceptable.
2 Click Execute Setup.
The IP address of the Wireless LAN Converter is temporarily changed so
that the computer can open the Wireless LAN Converter Setup Page.
If the computer connected to the Wireless LAN Converter is also connected to another
network, make sure that the new IP address does not duplicate the address of a device
on that network.
When you turn off or restart the Wireless LAN Converter, the IP address reverts to its
original setting.
Case 4 - I cannot display the Wireless LAN Converter Setup
Page
Is the temporary address assigned to the Wireless LAN Converter
used by another device or computer on the network?
If yes, proceed as follows:
1 Disconnect and reconnect the power cord of the Wireless Unit cable to
restart the Wireless LAN Converter.
2 Start the Converter Setup Utility.
3 In the IP Address Setup dialog box, replace the current Wireless LAN
Converter IP address with an unused address, and then click Execute
Setup.
Is the Web browser of the computer used for the Wireless LAN
Converter setup configured to use a proxy server?
Make sure that no proxy setting is enabled for the IP address of the Wireless
LAN Converter.
While the proxy server setting is disabled, it may not be possible to display other Web
pages except the Wireless LAN Converter Setup Page.
To disable the proxy settings, proceed as follows:
When using Microsoft Internet Explorer:
7