Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AperionAudio VERUS
Summary of Contents for AperionAudio VERUS
- Page 1 VERUS SPEAKERS OWNER’S MANUAL © 2020 Aperion Audio. All Rights Reserved...
- Page 2 Congratulations! You're moments away from experiencing your new Verus III ™ speakers. We're honored that you chose Aperion Audio to bring your music and movies to life! Feel free to contact us if we can answer any questions or provide you with setup advice.
-
Page 3: Connecting The Speaker
Connecting the Speaker 1. Connect a two-pole (+/-) loudspeaker cable to the binding posts, located at rear of the cabinet. The high quality, gold plated binding posts can accommodate different connection systems: • Banana plugs: The pins can be put directly into the binding post without any tightening necessary. •... - Page 4 Placement Following explanations refer to the figure below. The distance between each loudspeaker (A) and your listening position (B) should be about the same. Try to achieve an isosceles triangle. The distance between the loudspeakers should be the same or slightly less than the distance between each loudspeaker and your listening position (A, B).
-
Page 5: Multi-Channel Setup
Distance to back and side walls If a loudspeaker is placed near a wall, ceiling or floor, the lower frequencies will be amplified by the room. Sometimes this is desirable, sometimes it is not (this may lead to indistinct bass reproduction). The bass amplification becomes more obvious if the speaker is placed near a corner. -
Page 6: Break-In Period
0° 0° 22° 22° 22° 22° 30° 30° 30° 30° 90° 90° 110° 110° 135° 135° 135° 135° 150° 150° 150° 150° Subwoofer Most often a subwoofer will be utilized for the LFE-signal, especially in larger listening rooms. The position of the subwoofer will be dependent upon the size of the room and its acoustics. -
Page 7: Power Handling
Power handling Due to the construction and the driver technology Aperion speakers can be driven with very high power levels. With a high quality amplifier, delivering undistorted signals, the speakers can achieve high levels without any compromises in sound quality. Attention must be given to amplifiers with very low power and adjustable tone controls or switches. These types may soon overreach their own performance limits and may send distorted output signals to the speakers, compromising even high quality technology. -
Page 8: Package Contents
On the side of the box labeled “open this end first,” you will find the accessory box containing screws, feet, Allen key, carpet spikes and foot pads for the Verus Ill Grand Tower. Full instructions for attaching the feet are in the included unboxing guide. - Page 9 • Eight (8) rubber bumpers Note: If you are not wall or ceiling mounting the Verus III Grand Bookshelf speakers, be sure to use the included rubber bumpers on the bottom of the speaker to avoid damaging the finish. Specifications Frequency Response: (±3dB) 45-30,000 Hz -- (±6dB) 40-35,000 Hz...
- Page 10 TrebleMod Feature (Verus Ill Grand Towers and Bookshelf only) The Verus lIl Grand Towers include the TrebleMod feature that allows for reduction of the speaker’s high frequency response. On the back of the speaker near the binding posts you will see a set of jumpers labeled TrebleMod and two available configura- tions, one indicating 0dB and other -3dB.
- Page 11 On the side of the box labeled “open this end first,” you will find the accessory box containing screws, feet, Allen key, carpet spikes and foot pads for the Verus Ill Concert Tower. Full instructions for attaching the feet are in the included unboxing guide.
- Page 12 77 Lbs / 35 Kg Level Adjustment in the Treble range and Mid range (Verus III Concert Tower Only) For the midrange and tweeter we have chosen a crossover that has a fast transient response and a minimum of phase shifting.
- Page 13 VoiceRight™ The Verus III Grand Center employs Aperion’s own VoiceRight™ technology – a bass correction switch that allows you to get the best performance possible whether your speaker is on a stand, wall mounted, or in a cabinet. Simply flip the switch on the...
- Page 14 In dipole mode, the Verus Surround drivers are wired out of phase resulting in a diffuse sound field, perfect for immersive surround effects in movies! Switch the system to bipole mode and all the drivers are in-phase, resulting in the expansive...
-
Page 15: Express Limited Warranty
If you have any questions, comments, or concerns, please don’t hesitate to contact any of our Home Theater Gurus at 503.598.8815 or through a live chat via our website at www.aperionaudio.com – we’ll be happy to help you out with anything and everything you need. - Page 16 25599 SW 95th Avenue, Suite D, Wilsonville, OR, 97070 - 503.598.8815...
Need help?
Do you have a question about the VERUS and is the answer not in the manual?
Questions and answers