Page 2
The appliance coupler is used as the disconnect device and shall remain readily operable. Introduction We would like to thank you for buying an AperionAudio subwoofer. The electrical design of the subwoofer offers the ultimate in sound reproduction. In order to utilize your new device in the best possible way, please read this manual carefully before using it for the first time.
Page 3
Connections and Settings of the Subwoofer AUTO/ALWAYS ON When the switch is in the "AUTO" position, the subwoofer automatically turns on when an audio signal is present. If there is no signal (anymore), the device will switch to standby mode after some time. When the switch is set to the "ALWAYS ON"...
Page 4
POWER This toggle switch is the main switch of the device. It can be set to "ON" and "OFF". If the device is not going to be used for a long time (eg when you are on vacation), the main power switch should be turned off and the power cord disconnected.
Page 5
Recommended settings Settings home cinema system In this method, the AV receiver or AVR is the central control point of the system and is responsible for the bass management (splitting the frequency spectrum between speakers and subwoofer). In this case, use the following settings on the subwoofer: CROSSOVER: 160 Hz PHASE:...
Page 6
Troubleshooting and service If you should experience a problem with the operation of your subwoofer, please check all of the following hints before seeking service. Following is a simple troubleshooting guide to assist you. 1. Verify unit is plugged in and that the power outlet used supplies the proper AC voltage & current. 2.
Page 7
The bar indicates that the appliance was placed on the market after 13.08.2005 and is therefore subject to the obligation of the manufacturer to take an active role in the disposal in cooperation with disposal centers. AperionAudio HifiPilot GmbH Höhenstr. 7...
Need help?
Do you have a question about the Bravus II 10D and is the answer not in the manual?
Questions and answers