Getting Started >
Setting Up Your Computer
3
Connect other cables to the computer, if necessary.
❑ To set up TV connections available on models with the TV tuner board, see Using the TV Function
❑ To connect an HDMI cable to the HDMI INPUT port for using the HDMI Input function, see Using the HDMI Input
Function
(page
61).
❑ To connect your computer to an Ethernet network, see Using the Network (LAN)
4
Slightly pull the tab (6) of the cable clamp (7) with your fingertip in the direction of the arrow and gently pull it up to open
the cable clamp.
5
Route the cable(s) through the cable clamp and then snap the cable clamp back shut.
6
Replace the stand cover and the back panel cover.
See Removing and Replacing the Covers
(page 16)
for the procedure.
(page
52).
(page
79).
n
23
N