Table of Contents
Advertisement
Troubleshooting >
Display
Display
Why did my screen go blank?
❑ Your computer screen may go blank if the computer enters Sleep mode. If the computer is in Sleep mode, press any key
to bring the computer back into Normal mode. See Using the Power Saving Mode
❑ Make sure the computer input is selected. To change the display input, press the HDMI SELECT button on the right of
the computer.
❑ Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.
❑ The LCD backlight of your computer may have been turned off. Press the DISPLAY OFF button.
What should I do if I do not see proper images or videos?
❑ Be sure to select Highest (32 bit) for the display colors before using video/image software or starting DVD playback.
Selecting any other option may prevent such software from displaying images successfully. To change the display colors,
follow these steps:
1
Right-click on the desktop and select Personalize.
2
Click Display Settings.
3
Select Highest (32 bit) under Colors.
❑ Do not change the display resolution or colors while using video/image software or playing DVDs, as it may cause
unsuccessful playback/display or unstable system operations.
Additionally, it is recommended you disable your screen saver before starting DVD playback. If the screen saver is
enabled, it may be activated during DVD playback and prevent it from running successfully. Some screen savers have
been found to even change the display resolution and colors.
(page 107)
for more information.
n
160
N
Advertisement
Table of Contents
