Connecting peripheral devices
Connecting peripheral devices
You can add functionality to your computer by connecting any of these peripherals.
Before you connect a peripheral, turn off both the computer and the peripheral.
Connect the power cord only after connecting all cables.
Turn on the computer only after turning on all peripherals.
Please note that the configuration of the front/back panels shown in the following illustrations may vary
depending on your model.
❑
Connecting an external display
❑
Connecting a projector
❑
Connecting a TV
❑
Connecting an external microphone
❑
Connecting a Universal Serial Bus (USB) device
❑
Connecting a printer
❑
Connecting an i.LINK™ device
❑
Connecting a digital video camera recorder
❑
Connecting two VAIO computers
❑
Connecting to a network
✍
Hot plug and play devices should be plugged when the computer is switched on.
USB devices are hot plug and play devices. You do not need to shut down your computer prior to connecting these devices unless the manual supplied
with the device states otherwise.
(page 47)
(page 49)
(page 50)
(page 51)
(page 53)
(page 54)
(page 56)
(page 57)
(page 52)
(page 55)
n N
46