Connection Of Welding And Return Cable - ESAB Fabricator EM 400i Instruction Manual

5 OPERATION
4-stroke mode (welding with ending arc)
4-stroke repeat mode (Welding with repeated ending arc)
5.2

Connection of welding and return cable

The power source has two outputs, a positive terminal (+) and a negative terminal (-), for
connecting welding and return cables.
Connect the return cable to the negative terminal on the power source. Secure the return
cable's contact clamp to the work piece and ensure that there is good contact between the
work piece and the output for the return cable on the power source.
0446 404 001 - 16 - © ESAB AB 2020