Sony PCV-RX502 Software Manual page 125

Hide thumbs Also See for PCV-RX502:
Table of Contents

Advertisement

Using the product recovery disc(s)
Recovering the system without changing partition sizes
To completely restore the original software, drivers and settings on your computer without changing the
partition sizes, choose the first option and apply a Default System Drive Recovery. Performing this recovery
means that you will lose all the data stored on your C: drive, but data on your D: drive will remain.
You should allow one hour for the recovery process.
To perform the Default System Drive Recovery, proceed as follows:
1
Select the button next to Default System Drive Recovery (Recommended).
2
Click Next.
You are asked if you are sure you want to recover the system.
3
To start the procedure, click Next.
4
Click Yes to confirm.
The recovery process starts.
5
When asked to do so, remove the disc and insert the next one.
6
When the process is finished, click OK.
7
Click Next in the window that appears.
8
Remove the disc from the drive and click Finish.
Your system is restored to its initial settings and reboots automatically.
n N
124

Advertisement

Table of Contents
loading

Table of Contents