Table of Contents
Advertisement
Using the product recovery disc(s)
Starting the system recovery procedure
To start the system recovery, proceed as follows:
1
Turn on your computer (using AC power only) and insert the first system recovery disc into the disc drive.
2
If you are still able to access Windows
off)*.
3
Wait 10 seconds then turn the computer back on.
4
The system starts to read the disc automatically and you are asked to wait.
5
Click Next in the window that appears.
6
Read the introduction and click Next.
You can now choose the nature of the recovery.
* If your system is severely damaged and you can no longer access Windows
power button for longer than four seconds. Wait for ten seconds before pressing the button again to turn the power on.
®
, shut down your computer (Start/Turn Off Computer/Turn
®
, you will have to turn off the computer by pressing the
n N
123
Advertisement
Table of Contents
