Zcomax enterprise-class
802.11a/b/g wireless access point (61 pages)
Summary of Contents for ZComax ZN-1000-ZBS
Page 1
HARDWARE OVERVIEW State Description Front View Smart Training Function (Yellow) ZN-1000-ZBS Smart Access Point Training complete (Blue) Quick Setup Guide Disabled Blinking Connected in AC This Quick Setup Guide provides step-by- Mode (Yellow) mode step instructions on how to set up your ZN-...
Page 2
STEP 3: LOG INTO THE AP SETUP REQUIREMENTS 1. On your PC, open a Web browser window. Before installing your ZN-1000-ZBS access point, 2. In the browser, type https://192.168.1.1 be sure that you have the following: press <Enter> to connect to the AP.
Page 3
1. Slide the locking nut over the bare end of STEP 5: INSTALL THE AP 4. Insert the washers over the retaining screws and insert through the T-bar clip the Ethernet cable. 1. Disconnect the AP’s power adapter from the 2.