Adding / Replacing A Memory Module - Sony PCV-RS602 Hardware Manual

Hardware Guide

Adding / replacing a memory module

If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your dealer.
To add or change a memory module, proceed as follows:
1 Shut down the computer, unplug it, and remove any peripheral devices.
2
Wait for the computer to cool down.
The inside of the main unit becomes very hot during operation. Wait for about
one hour for the computer to cool down before opening the unit.
3 Position the main unit so the back panel is facing you.
4
Unscrew the three cover release screws located on the edges of the back panel,
and set them aside.
The cover is released.
5
Slide the cover towards the back of the unit to remove it then gently place the
unit on its side.
n N
48
Upgrading your VAIO computer