Viewing The Amount Of Memory; Adding / Replacing A Memory Module - Sony VGC-RA304 User Manual

User Guide

Viewing the amount of memory

To view the amount of memory, proceed as follows:
1
Turn on the computer.
2 Click the Start button, point to All Programs, Security & Utilities, then VAIO System Information, and click VAIO System
Information again.
You can view the amount of installed memory here.

Adding / replacing a memory module

If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your dealer.
To add or change a memory module, proceed as follows:
1 Shut down the computer, unplug it, and remove any peripheral devices.
2
Wait for the computer to cool down.
The inside of the main unit becomes very hot during operation. Wait for about one hour for
the computer to cool down before opening the unit.
3
With the main unit's back panel facing you, locate the tabs on the side cover, and release
them up until the cover opens, as shown.
4 Set the cover aside.
Picture may vary from actual configuration.
n N
59
Upgrading your VAIO computer