Honda HRR216PKA Manual page 61

FUEL SYSTEM
FUEL TUBE REMOVAL/INSTALLATION
1. Turn the fuel valve to the OFF position, and install a
fuel tube clamp on the fuel tube.
Use pliers to open the fuel clip, and slide the fuel clip
up the tube.
2. Rotate the fuel tube to help release the tube from the
fuel valve fitting.
3. Gently pull the fuel tube from the fuel valve. Do not pry
against the fuel valve with a screwdriver or other tool
when removing the fuel tube.
NOTICE
If the fuel tube is pried off the fuel valve with a tool, the
fuel valve may be damaged.
4. Connect the fuel tube to the fuel valve.
Use the correct low permeation fuel tube for
replacement. The fuel tube must contain the
emissions-compliant identification number.
5. Position the fuel tube clip over the fuel valve fitting.
6. Remove the fuel tube clamp, and return the fuel valve
to the ON position.
7. Check for fuel leaks and repair as necessary.
7-12
FUEL VALVE
FUEL CLIP
FUEL CLAMP
LOW
PERMEATION
FUEL TUBE
with emissions-
compliant identification
number
HRR216PKA