Digital Control DigiTrak Falcon F1 Quick Start Manual page 7

Table of Contents

Power on the Locator1
Steps Required before Drilling1
Optimize and Measure Active Interference1
Basic Method: Quick Scan Pair (QSP)1
Advanced Method: Scan, Pick, and Pair2
Pair the Locator with the Transmitter (Tx)2
Calibrate3
Settings Menu3
Height-Above-Ground (HAG) Menu3
Locate Mode Screen4
Basic Locating4
Signal Attenuation4
Transmitter Signal Field Geometry5
Bird's-Eye View on Locate Mode Screen5
Depth and Predicted Depth Readings6