Table of Contents
Advertisement
Quick Links
CONTENTS
Overview
1
.
2
.
3
.
4
.
5
.
6
.
7
.
8
.
9
.
1
Overview
This operating manual is to get you acquainted with construction, rules of operation (intended usage,
technical maintenance and repair, storage and transportation) of the Digital bug detector BugHunter
Professional BH-02 Rapid (hereafter referred to as the Product).
The Product is a portable device intended to detect near field radio transmitters such as wireless "bugs",
wireless microphones, wireless spy cams, portable radio sets, working cellphones, cellular signal killers and
suppressors, etc.
The main feature of the Product is an extended dynamic range (from 30 to 4500 MHz), that makes it
possible to increase the range of devices that can be successfully detected by the Product.
Warning!
Read carefully this manual in order to provide continuous, successful and safe operation of the Product.
Follow the rules, restrictions and instructions contained in this manual to increase the lifespan of the
Product and to use it more effectively.
The manufacturer's warranty shall be void if operation and storage regulations are violated.
Digital bug detector BugHunter
Operating manual INTK.411153.009 RE
тм
Professional BH-02 Rapid
тм
Advertisement
Table of Contents
Related Manuals for i4Technology BugHunter Professional BH-02 Rapid
Summary of Contents for i4Technology BugHunter Professional BH-02 Rapid
-
Page 1: Table Of Contents
тм Digital bug detector BugHunter Professional BH-02 Rapid Operating manual INTK.411153.009 RE CONTENTS Overview Specification and operation Technical features Component parts Operation and description Оperation procedure Сontents of delivery Maintenance Package and transportation Acceptance certificate Manufacturer’s warranty Certification details Overview This operating manual is to get you acquainted with construction, rules of operation (intended usage, тм... -
Page 2: Specification And Operation
After storing the product in a cold place or transporting in wintertime, the Product should be kept at room temperature for two hours before operating. Specification and operation Technical features The Picture 1 illustrates the physical configuration of the Product. Pic. -
Page 3: Operation And Description
Pic. 2 Main parts scheme The Product consists of an ABS plastic case (item 1) with pre-installed: - electronic microprocessor-based module with receiving antenna (item 2); - membrane keyboard (item 3); - battery pack (item 5) situated in battery compartment with cover (item 6). There are the following controls and indicators on the faceplate: - 2 sensitivity adjustment button - item 7 and 8;... -
Page 4: Оperation Procedure
pressing the button and holing it pressed (at least for 3 sec); - decrease the level of sensitivity by pressing the button repeatedly, and automatically adjust the sensitivity to the ambient electromagnetic field by pressing the button and holing it pressed (at least for 3 sec). - Page 5 4.3 Carefully inspect for the presence of wireless “bugs” the site, where the maximum emission strength has been found, the sensitivity level can be adjusted manually at that by pressing (increasing) button and ( decreasing) button. 4.4 If in the analog (permanent) search mode all or a part of LEDs on the indicating scale flash on and off rapidly, switch the Product into digital (impulse) search mode.
-
Page 6: Сontents Of Delivery
- The locations where eavesdropping devices and hidden cameras are usually placed are: cavities and chinks in plinths and walls, behind radiators, remote places on wardrobes and curtain-rods, cavities of suspended ceiling, ventilating shafts, furniture elements, household equipment, flowers, car dashboards and seats, etc. - The device automatically adjusts the sensitivity level and starts displaying the actual value of signal strength on the indicating scale when you turn it on. -
Page 7: Acceptance Certificate
9. Manufacturer’s warranty 9.1 The products made by Russian manufacturer and developer of innovative electronic devices i4Technology™ is distinguished by high quality and long service life. Multiple tier system is implemented in the manufacturing plant. The manufacturer uses only high quality and expensive element base made in Europe, USA and Japan. - Page 8 _____________________________________________________________________ QC stamp _____________________________________________________________________ Sale date _____________________________________________________________________ Vendor’s stamp and signature _________________________________________________________________ The customer does not have any claims on quality of the product and the contents of delivery. The equipment is in good repair. ____________________________________________________ (customer’s signature)