Advertisement
12 Volt Power Adapter Harness Installation: for '18-'Current JL & JT Gladiator
FIG17
Put on safety glasses. Using a trim clip
removal tool gently remove the center
dash control center (FIG 17)
FIG19
Remove the center screw using a Phillips
head screwdriver and set aside. (FIG 19)
FIG21
Tilt panel away enough to access the
12v socket connection. Squeeze the blue
tab and disconnect it. (FIG 21)
FIG18
Disconnect any wiring harnesses and set
control panel aside. (FIG 18)
FIG20
Gently pry out the window control
panel from the top and work your way
down. (FIG 20)
FIG22
Connect the white connector to the
original plug you just disconnected in
FIG5. Connect the gray connector back
into the 12v socket. (FIG 22)
7
Advertisement
