Advertisement
12 Volt Power Adapter Harness Installation: for '11-'18 JK
FIG8
Under the steering column remove the
center panel by pulling it away from the
dash releasing the clips. (FIG8)
FIG10
Using a trim clip removal tool gently
remove the window control switch or
dash pocket if switches aren't present.
(FIG 10).
FIG12
FIG9
Remove the two screws using a 7mm
socket. (FIG9)
FIG11
On the window control switch
slide the red locking tab over, squeeze
the black tab and disconnect the
harness. (FIG 11)
Remove the center screw using a 7mm
socket. (FIG 12)
5
Advertisement
