Table of Contents
Advertisement
Use of timer turn off function for corresponding heater (available only in
some models)
After reaching a remaining time of 0 minutes, the timer stops the linked
Display. In the Timer Display is shown ´00`. The related timer Cooking Zone
Indicator disappears.
An assigned Dual/Triple Zone Selection Indicator also disappears if it is
active.
confirmation of the timer run out by touching any button, the buzzer goes
silent.
Timer Function (available only in some models)
The timer provides following features:
The control can run max. 4 heater assigned timers and 1 minute minder
(which is assigned to no heater) simultaneously.
independent of any heater.
In order to use both functions, timer function must be activated by the
Active/Deactive Timer button
Touching
for the fist time after activating the heaters, the control proposes
the minute minder (no Cooking Zone Indicator is flashing, they are all on
or off).
Touching
for the second time, the control proposes the assignment to
one of the activated heaters by flashing Cooking Zone Indicator. Now the
timer to the linked timer signalised.
Touching
again, the next timer in the in the clockwise direction, is
.
15
Advertisement
Chapters
Table of Contents
