Advertisement
https://appliancetechmanuals.com
Air Conditioner Features
( ( c c o o n n t t i i n n u u e e d d ) )
STEP 5 — TO OPERATE
ON FAN ONL Y:
Note: Use this function only w hen cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to
open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan
speed you prefer.
During this function, the display w ill show the actual current temperature, not the set temperature as in the cooling mode.
STEP 6 — TO USE THE POWER
SAVER FEATURE:
72
Note: In this mode, w hen the compressor shuts off, the fan w ill continue to run for another 3 minutes, then shut off until
cooling is needed, as sensed by the room temperature control. During this time, it may come on for 3 minutes to sense w hether
cooling is needed, then it w ill go off for 15 minutes. It w ill continue doing this to sample the room air for as long as necessary.
STEP 7 — TO SET FOR
DELAYED START:
Note: To do this, the unit must be in the off position.
When first set, the display w ill show .5. (one half hour),to increase the time up to 24 hours, go to step 8.
DO THIS:
PRESS ON
(if not running)
PRESS
FAN ONLY
CHOOSE ONE
DO THIS:
PRESS
POWER SAVER
DO THIS:
PRESS OFF
(If unit is running)
PRESS TIM ER/OFF
7
YOU WILL SEE:
72
YOU WILL SEE:
72
YOU WILL SEE:
0.5
Advertisement
