Fuel line connection
Once the power pack has been anchored to the machinery,
proceed with connection of the fuel suction and return hoses.
Remove the black protective cap A and connect the suction
hose from the fuel tank to the fitting locking it in position with a
metal clamp.
Cut the plastic ties and connect the return hose B to the special
fitting on the fuel tank locking it in position with a metal clamp.
Important
• The illustrations refer to a Stage IV engine. They are however
valid for all engine versions.
Warning
• After the first engine start-up, ensure there are no fuel leaks
from the hoses.
CIRCUITS
51
A
B
EN