Related Manuals for Sencor SCT 9412DBMR
Summary of Contents for Sencor SCT 9412DBMR
- Page 1 SCT 9412DBMR User Manual DAB+ CAR RADIO WITH A MULTIMEDIA PLAYER AND RDS RADIO WITH BLUETOOTH...
-
Page 3: Table Of Contents
IF YOU WANT TO USE THIS PRODUCT CORRECTLY, CAREFULLY READ THIS USER'S MANUAL AND STORE IT FOR FUTURE REFERENCE. IF YOU GIVE (SELL) THE APPLIANCE TO SOMEBODY, PLEASE ALSO INCLUDE ALL THE DOCUMENTATION TOGETHER WITH THIS APPLIANCE, INCLUDING THIS INSTRUCTION MANUAL. Table of Contents Installation instructions .........................2 Installation ............................3... -
Page 4: Installation Instructions
Installation instructions 1. Installation instructions The device is designed to be powered by 12 V direct current. Before installing the unit, check that your vehicle has a 12 V power supply with the negative pole going to ground. The negative pole of the battery must be disconnected before the device is connected. -
Page 5: Installation
Installation 2. Installation The following accessories are included with the device Main unit and front Remote control Reduction frame ISO connectors Audio and video panel (with case) cable Hex bolt Screw x 4pcs Rubber washer User’s manual ISO male Disassembly tool (2PCS) 2.1. - Page 6 Installation If necessary, use a metal strip to secure the rear side of the unit. The strip can be bent to the necessary angle by hand. Fireproof partition Dashboard Release the dashboard Attach the rear bracket screws and the rear cable bundle and safely secure the device in place.
-
Page 7: Electronic Connection
Installation 2.2. Electronic connection ATTENTION: We recommend that the connections are made by a professional. This will prevent your unit from malfunction, protect your unit and other objects from damaging and ensure safe and trouble-free operation! EN 5 2021 08/2021... -
Page 8: Connecting Leads
Installation 2.3. Connecting leads Use the adaptor bundle connected to the device’s multiconnector and the relevant inputs and outputs on the other side. Ensure that the connections are properly made and the insulation of both connected a disconnected leads is good! Connector/Object Connect to Pink lead Parking brake (-) - Page 9 Installation Note: Watching the video without the parking brake being set is locked, showing a screen message. Video blocking applies to the main screen only, rear screen RCA output is not locked. CONNECTOR A MEMORY +12 V BAT VEHICLE ANTENNA OUTPUT +12 V ACC (TO IGNITION) GROUNDING Note: (connector A no.7) must be connected by...
-
Page 10: Control Panel And The Remote Control
Control panel and the remote control 3. Control panel and the remote control The following pictures show the control panel and the remote control. The display and symbols shown on the picture above may differ from the actual control panel and of the remote control. -
Page 11: Description Of The Remote Control
Control panel and the remote control 11. DISP 8. AMS • To switch clock/device status • Automatic scanning and storing display (radio frequency etc.) available stations (long press) or browsing through previously stored • To release the front pane lock to stations (short press). -
Page 12: Remote Control And Batteries
Control panel and the remote control 3. 1.1. Changing the batteries If the range of the remote control is reduced or the device does not respond to any functions during operation, replace the battery with a new one. Ensure that you maintain the correct polarity when inserting the battery into the remote control. -
Page 13: Control And Operation
Control and operation 4. Control and operation 4.1. General controls Turn the device on / off, mute volume Press the vol knob to turn the power on. Press and hold the vol knob to turn the power off. In any mode, press the vol knob to activate or deactivate mute. Selecting a source Press the MOD button to select the source or press... -
Page 14: Radio
Control and operation 4.4. Radio Selecting a mode During operation, repeatedly press the MOD button and select the radio mode. Selecting a broadcast band width Press the BND button repeatedly to select frequency band. Up to 6 stations can be stored in each frequency band and selected with the shortcut buttons. -
Page 15: Controlling The Rds
Control and operation 4.5. Controlling the RDS 4.5.1. Overview of RDS functions The Radio Data System (RDS) is a service, which makes it possible for FM stations to broadcast other digital information together with the standard program signal. Some of them are listed below. It depends on the specifi c station, which data is used for transmission and when. - Page 16 Control and operation 4.5.3. Setting up the RDS mode Set the device as required so that when receiving the given specifi c RDS information (described above) it reacts appropriately. Alternative frequencies AF When AF is turned on (AF ON), the device will monitor reception quality. If it declines, it will search for a better quality reception of the same station based on the broadcast data, and when it fi...
-
Page 17: Usb / Sd
Control and operation 4.6. USB / SD USB / SD mode selection During operation, repeatedly press the MOD button and select either a USB or SD input. USB port MU: Insert a USB device into the USB port to playback MP3/WMA audio fi les. After inserting a device into the USB slot playback will commence automatically. - Page 18 Control and operation Audio During playback, press to open the fi le list. By pressing the symbol at the bottom of the list, you can select by fi le type (music/photo/video) Video : selection shortcut (touch the message window to switch) : File and folder list : skip to previous/next title, chapter, track, fi...
-
Page 19: Bluetooth Controls
Activate the Bluetooth feature in your mobile telephone. On your telephone, start a scan for new devices for pairing After the scan is complete select "SCT 9412DBMR" from the list and confi rm the pairing. The entry code, which you may be asked for is "0000" and confi rm. -
Page 20: Dab Reception
Control and operation Receiving a call The phone number of the caller will appear on the display when a call is being received (depending on the type of mobile telephone). Press the BND button on the main unit or the "ANSWER" button on the remote control. Dialling in Bluetooth mode Enter the number on the mobile phone as usual, once the number starts being dialled, "CALLING"... -
Page 21: External Input Mode (Aux-In)/Av Input (Av-In)
Control and operation In the list of stored stations, touch the station button on the screen or, select the number buttons 1-6 on the front panel to select the stations in the respective order. You can also switch the stations step by step with buttons / on the screen or remote control. Favourite stations To add a station in your favourites, hold down the heart icon at the station’s name in the station list. -
Page 22: Settings
Control and operation 4.10. Settings Press the button to go to the home page, turn the JOG DIAL to select Setting and tap to open the Setting menu. Select a setting, touch to confi rm, or change the value. System menu Audio settings Select the aspect ratio 16:9/4:3 Set the brightness of the screen... -
Page 23: Troubleshooting
Troubleshooting 5. Troubleshooting The device is not working: – Check that all connections are connected correctly. – Check for a burned fuse. No audio – Check that the loudspeakers are connected correctly. The device has "frozen” – Turn off the device and restart it or disconnect it from the power supply and reconnect The device does not respond to any button pressing –... -
Page 24: Technical Specifi Cations
The CE symbol displayed on the unit, the user's manual and on the packaging shows that the unit meets the basic requirements of the R&TTE directive, 1995/5/EC, and the Low voltage directive 73/23/EEC. The declaration of conformity can be found at www.sencor.cz. 22 EN 2021... - Page 25 FAST ČR, a.s. hereby declares that the radio device type SCT 9412DBMR conforms to the 2014/53/EU directive. For full version of the EU declaration of conformity, please refer to www.sencor.eu website.
- Page 26 Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warranty seal has been damaged). Authorized service centers Visit www.sencor. for detailed information about authorized service centers. 24 EN 2021...
- Page 28 FAST ČR, a.s., U Sanitasu 1621, Říčany CZ-251 01...