SPRI BALANCE TRAINER Setup, Workout Tips And Care & Safety Manual

BALANCE TRAINER

SETUP, WORKOUT TIPS, AND CARE & SAFETY GUIDE

Please read before setting up or using your Balance Trainer.

TOOLS NEEDED:

Balance Trainer pump (you may want to use a bicycle pump or compressor for initial inflation).

SETUP

1. Remove Balance Trainer from box and check for shipping damage. (Note: It is normal for

domes to have slight creases or fold marks when first inflated.)

2. Allow Balance Trainer to reach room temperature before inflating.

3. Attach inflator tip to Balance Trainer pump. Alternatively, the inflator tip can be used with

most standard bike pumps. Insert inflator tip into hole in Balance Trainer. Inflate Balance

Trainer to the desired height and firmness.

4. Remove inflator tip from ball and immediately insert plug into hole so head is flush with surface of

ball.

• Inflate Balance Trainer and plug.

• Balance Trainer may not inflate to 100% of size on initial inflation.

• Wait 24 hours.

• Deflate 50% and inflate again.

• Due to the material, the trainer will increase to proper size with second inflation.

#BETTEREVERYDAY

Table of Contents

Do you have a question about the BALANCE TRAINER and is the answer not in the manual?

Page 1 Please read before setting up or using your Balance Trainer. TOOLS NEEDED: Balance Trainer pump (you may want to use a bicycle pump or compressor for initial inflation). SETUP 1. Remove Balance Trainer from box and check for shipping damage. (Note: It is normal for domes to have slight creases or fold marks when first inflated.)
Page 2 Always check for proper inflation prior to use. 8. Only use the Balance Trainer indoors, on a carpeted area, away from walls, tables or other obstructions. Make sure the floor surface is free of pins, staples or other sharp objects.