SPRI Push-Up Bars Assembly Instructions

Push-Up Bars

Assembly Instructions

Step 1:
Each Push-Up Bars
consists of (1) curved
hand bar, (2) straight
legs, and (2) hand
screws.
Step 2:
Insert (1) leg into each
end of hand bar and
align screw holes.
NOTE! Legs
are positioned
perpendicular to hand
bar.
Step 3:
Insert (1) hand screw into each
of the screw holes located at
the lower, inside portion of
each side of the bar and hand
tighten.
Step 4:
Before each exercise
session, grasp top of
each Push-Up Bars and
apply direct downward
pressure. Tighten hand
screws if any bar
instability is noted.
Consult your physician
before beginning any type
of exercise program.
Push Up Bar_IS_R2.indd 1 8/17/11 11:42 AM