Pairing The Btunes With Multi-Point Devices; Battery Display - Bose QC25 User Manual

3）Pairing the BTunes with multi-point devices
The BTunes can connect with two Bluetooth devices at the same time.
The general pairing procedures are as follows:
1)Pairing the BTunes with device one.
2) Turn on the BTunes and make it enter into pairing mode again, and pair with
device two.
3) Operate device one to connect with the BTunes. The BTunes has already
connected with two devices in this moment.
Remark:
1)Power on multi-point:Standby mode or pairing mode,press MFB button and
volume up button simultaneously, release it till blue LED on 1s;
2)Power off multi-point:Standby mode or pairing mode, press MFB button and
volume down button simultaneously,release it till red LED on 1s .
3) To have a good user experience, it is better power off multi-point function if
connecting withonly one device.

4. Battery display

When the BTunes connected with iOS devices or some Android devices, it will
display the battery of the BTunes on the device. When the BTunes battery low,
the power symbol show red.
5