Brother P-Touch 580C User Manual page 128

ERROR MESSAGE
NUMBERING BUFFER
FULL
OPEN
THE COVER!
RAM PROBLEM!
REPLACE BATTERIES!
ROM PROBLEM!
SYSTEM ERROR!
TOO HIGH!
TOO LONG!
WRONG SELECT
124
CAUSE
This message appears if the
RETURN key is pressed in
Seq. numbering mode when
the working area buffer is alre-
ady full.
This message appears when
the tape compartment cover
is closed while rewinding the
tape during multi-color printing.
This message appears if there
is a problem with the machine's
random access memory.
This message appears when the
installed alkaline batteries are
about to run it.
This message appears if there
is a problem with the machine's
read only memory.
This message appears if there
is a problem with the machine's
software.
This message appears if the size
of the text is larger then the width
of the installed tape.
This message appears if the width
of the text is longer then the label
length that has been set.
This message appears if the text
inputted as an entry in Auto format
mode exceeds the preset length.
This message appears if more
then five characters are selected
as the numbering field.
This message appears if charac-
ters with different format settings
are selected as the numbering
field.
REMEDY
Press the CANCEL key and
delete some of the text befo-
re entering Seq. numbering
mode.
Open the compartment cover,
then press the RETURN key.
Contact your service reper-
sentative.
Replace the batteries or use
the AC adaptor.
Contact your service reper-
sentative.
Contact your service reper-
sentative.
Reduce the size of the char-
acters or install a tape of gra-
ater width.
Delete some of the text, re-
duce the character width or
increase the preset label le-
ngth.
Enter fewer characters.
Limit the numbering field to
five characters.
Only select characters with
identical format settings.