Brother P-Touch 580C User Manual page 124

ERROR MESSAGE
CANCELED DATA!
PRESS ANY KEY
CAN'T DELETE
TAPE EDGE!
CAN'T HERE
CHANGE ADAPTOR
CLOSE
THE COVER!
120
CAUSE
This message appears if the
CANCEL key is pressed while
data is being transmitted from
the computer to this unit in Inter-
face mode.
This message appears if the
end of the tape cannot be
detected during multi-color
printing.
This message appears if a
character, symbol, return or
new block is entered while
the cursor is located in a bar
code field.
This message appears if the
cursor is located in a bar code
field and a text format (font, size
width, style, underlining and
framing, or color) key is pressed.
This message appears if a
text file is recalled and joined
to the current massage while
the cursor is located in a bar
code field.
This message appears if a
high-voltage adaptor is being
used.
This message appears in
any mode when the tape
compartment cover is open.
REMEDY
Press any key other then the
CODE, SHIFT, ALT or CAPS
keys, then try again.
Pull out some excess tape
and hold the end of the tape
while turning the tape roll to
tighten the tape in the cass-
ette.
Align the end of the tape with
the edge of the cassette,
then try using the multi-color
printing function again.
Press the CODE and 6 keys
to skip colors and return to
the point where printing
stopped.
Move the cursor or delete
the bar code field before
entering the character, sym-
bol, return or new block.
Move the cursor or delete
the bar code field before
pressing the text format key.
Move the cursor or delete
the field before recalling the
text files.
Remove the high-voltage
adaptor and install the
optional 7.0V 1.2A AC
adaptor.
Close the compartment
cover.