Checking The Installation Materials; Checking The Installation Materials; Siting The Controller; Siting The Controller - NORTHROP GRUMMAN T6MC User Documentation

Checking the Installation Materials

The Park Air part number for the T6MC controller is BT6MC and the Park Air part number for the T6MC
rack mount controller is 70-T6MCRACK. The items listed in
numbers. Check that all items have been received.
Item Number
T6MC controller complete with enclosure
1 or
T6MC rack mount controller kit
2 Hand microphone terminated with 7-pin DIN plug
2 m mains cable terminated with a 3-pole socket (mates
3
with ac input plug)
15-way D-type plug (mates with Facilities socket)
comprising:
4
Plug connector
Cover

Siting the Controller

Site the controller away from sources of heat and in a position that allows access to the rear panel
connectors and the Power On/Standby switch.

Setting the Line Level Link

For -13 dBm operation of the audio/PTT lines, link LK5 (see
0 dBm line level LK5 on the main PCB should be removed. To gain access to the controller's main PCB
refer to Fig 7-3, remove the four screws shown and withdraw the unit from its case. To gain access to
the rack mount controller's main PCB refer to
cover.
Park Air T6MC Controller
Table 4-2 Installation Material
Description
Fig 7-5, remove the three screws shown and remove the
Page 4-3
Back to Disk Menu
Table 4-2 are included under these part
Quantity Park Air Part Number
1 BT6MC
1 70-T6MCRACK
1 24-11030301
1 17-03000038S
1 20-01150100
1 20D09150101
Fig 7-6 and Fig 7-7) should be fitted. For
Installation