Introduction - NORTHROP GRUMMAN T6MC User Documentation

Introduction

WARNING
The instructions given in this topic involve connecting dangerous voltage to the controller
and should be carried out only by suitably qualified personnel.
Caution
Changes or modifications made to this equipment that are not expressly approved by
Park Air, or parties authorized by Park Air, could void the user's authority to operate the
equipment.
The procedures necessary to install a controller are listed in
1 Checking the installation materials
2 Siting the controller
3 Setting the line level link
4 Connecting the controller to T6 radios
5 Connecting controllers in parallel
6 Connecting the chassis stud to earth
7 Connecting the dc input supply (if required)
8 Connecting a tape output (if required)
9 Connecting an external cradle switch (if required)
10 Connecting the ac input supply (if required)
11 Connecting a microphone to the controller
Park Air T6MC Controller
Dangerous Voltage
Unauthorized Modifications
Table 4-1 Installation Procedures
Procedure
Table 4-1.
Page 4-2
Back to Disk Menu
Reference
page 4-3
page 4-3
page 4-3
page 4-4
page 4-4
page 4-4
page 4-5
page 4-5
page 4-5
page 4-6
page 4-6
Installation