ZyXEL Communications LTE5121 User Manual page 31

Table 2 System Info Screen (continued)
LABEL
Host Name
Model Name
MAC Address
Firmware Version
WAN Information
Mode
IP Address
IP Subnet Mask
WAN 2 Information
Mode
IP Address
IP Subnet Mask
LAN Information
IP Address
IP Subnet Mask
DHCP Server
DHCPv6 Server
WLAN Information
Channel
WPS Status
SSID (1~4) Information
SSID
LTE-5121 User's Guide
DESCRIPTION
This field displays the LTE Device system name. It is used for
identification. You can change this in the Maintenance > System
screen's Host Name field.
This is the model name of your device.
This is the MAC (Media Access Control) or Ethernet address unique to your
LTE Device.
This field displays the current version of the firmware inside the device. It
also shows the date the firmware version was created. Go to the
Maintenance > Firmware Upgrade screen to change it.
This shows the connection type of the LTE Device's first WAN connection.
It displays 4G LTE for an LTE connection, 3G UMTS for a 3G connection,
2G GPRS for a 2G connection, or UNKNOWN if the carrier's signal
coverage is out of the expected scope.
This is the method of encapsulation used by the ISP.
This field displays the current IP address of the LTE Device in the WAN.
This field displays the current subnet mask in the WAN.
This shows the connection type of the LTE Device's second WAN
connection. It displays 4G LTE for an LTE connection, 3G UMTS for a 3G
connection, 2G GPRS for a 2G connection, or UNKNOWN if the carrier's
signal coverage is out of the expected scope.
This is the method of encapsulation used by the ISP.
This field displays the current IP address of the LTE Device in the WAN.
This field displays the current subnet mask in the WAN.
This field displays the current IP address of the LTE Device in the LAN.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the LTE Device is providing to the
LAN. Choices are:
Server - The LTE Device is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
None - The LTE Device is not providing any DHCP services to the LAN.
This field displays what DHCPv6 services the LTE Device is providing to
the LAN. Choices are:
Server - The Device is a DHCPv6 server in the LAN. It assigns IP
addresses to other computers in the LAN.
Relay - The LTE Device acts as a surrogate DHCPv6 server and relays
DHCP requests and responses between the remote server and the clients.
None - The LTE Device is not providing any DHCPv6 services to the LAN.
This is the channel number used by the LTE Device now.
Configured displays when a wireless client has connected to the LTE
Device or WPS is enabled and wireless or wireless security settings have
been configured. Unconfigured displays if WPS is disabled or wireless
security settings have not been configured.
This is the descriptive name used to identify the LTE Device in the wireless
LAN.
Chapter 3 Connection Status and System Info
31