Table of Contents
Advertisement
Chapter 26 Backup/Restore
Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from your
computer to your LTE Device.
Table 94 Restore Configuration
LABEL
File Path
Browse...
Upload
Reset
Do not turn off the LTE Device while configuration file upload is in
progress.
After the LTE Device configuration has been restored successfully, the login screen appears. Login
again to restart the LTE Device.
The LTE Device automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 142 Network Temporarily Disconnected
If you restore the default configuration, you may need to change the IP address of your computer
to be in the same subnet as that of the default device IP address (192.168.1.1).
If the upload was not successful, an error screen will appear. Click OK to go back to the
Configuration screen.
212
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse ... to
find it.
Click this to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Click this to begin the upload process.
Click this to reset your device settings back to the factory default.
LTE-5121 User's Guide
Advertisement
Table of Contents
