Matrox Altiz Quick Start Manual page 8

Using multiple Matrox Altiz units
Set the delay (star configuration for AltiZ 2, AltiZ 4 ...)
If you are using the star configuration, you will need to set a delay for all of the AltiZ units following AltiZ
1. To set a delay, perform the following:
- Navigate to Counter and Timer Control and expand the Timer Selector category, then
select Timer0
- Set the timer duration to the desired delay value (for example, 50us)
- Set Timer Trigger Source to Line 0 (if the Exposure Active signal is transmitted to AUX_IN0)
- Set Timer Trigger Activation to Falling Edge.
Application Note
Preliminary
December 7, 2020
Page 8 of 8