Daisy Chain Configuration - Matrox Altiz Quick Start Manual

Using multiple Matrox Altiz units

Daisy chain configuration

In this configuration, the Sync signal is transmitted sequentially from one Matrox AltiZ unit to the next.
In the case of an overlap between the FoVs, acquisition for the following AltiZ in the chain is triggered by
the falling edge of the Exposure Active signal from the previous AltiZ in the chain. In the daisy chain
configuration, the exposure is limited to half of the Acquisition Line Period, minus the ON to OFF
response time
100µ�� < ���������������� �������� <
Application Note
Preliminary
December 7, 2020
���������������������� �������� ������������
2
Page 3 of 8
− ��
����/������