Matrox Altiz Quick Start Manual page 7

Using multiple Matrox Altiz units
Set the I/Os
In our example the Sync signal we are using is the ExposureActive signal from AltiZ 1.
The ExposureActive signal is transmitted across the AUX_OUT4 output signal of AltiZ 1 to the AUX_IN0
input signal of AltiZ 2 and to subsequent Matrox AltiZ units. To set the Line Source for our Sync signal,
perform the following:
- Navigate to Digital IO Control and set Line4 under Line Selector
- Expand the Line Selector category and set Line Source to Exposure Active
Application Note
Preliminary
December 7, 2020
Page 7 of 8