Standby Mode; Operation - Dimplex ML Series Installation And Operating Instructions Manual

Secure using the foot fixing screw,
Return the convector to the upright position,
The appliance is now ready for use.

Operation

IMPORTANT - OBJECTS OR CLOTHING MUST NOT BE
PLACED ON THIS HEATER.
Before using the heater ensure that all warnings and instructions
have been carefully read.
CONTROLS
Week day
Time
Decrease Temperature
(Min 5ºC/43ºF)
Program
FIRST TIME STARTUP
To activate the heater, after installation or assembly,
simply plug it in. You will hear an audible beep and the
standby button will illuminate. This indicates the appliance
is energised and ready for use.
Fig. 3
Temperatue
Heat output
Enter/Select
Increase Temperature
(Max 30ºC/86ºF)
Mode / Menu
Standby
Fig. 4
Standby button/ indicator
(Red)
Fig. 5

STANDBY MODE

Standby mode is an inactive mode where the
appliance will not emit any heat. In this mode the
appliance is plugged in ready for use. Power is going
to the product but the product is not turned ON. This
mode is indicated by a red standby button/indicator.
The screen will be off and no other buttons will be
visible, see Fig. 5.
To activate the appliance you can choose to press
the Standby button or pair to a remote wireless
connection via the Dimplex
will change to green and the screen and buttons will
illuminate, see Fig. 6.
For first time startup, the product will start with
default settings of 25°C in ECO Mode and Manual
operation.
If not the first time startup, and when the product is
subsequently turned on, the product will return to
the last used settings for Heat Mode, Temperature
Setting, Sound ON/OFF. If wireless connection was
selected before, then it will attempt to re-pair, see
Remote Wireless Connectivity/Pairing.
If the product is powered on and the standby button
is pressed, there is a countdown timer from 10 to 1
before shutting down.
When disconnected from the power supply (plugged
out/power cut/tilt switch) then reconnected and
turned back on, the product will return to last used
settings for Heat Mode, Temperature Setting, Sound
ON/OFF. Wireless connection will attempt to re-pair.
Note: The element has been coated with a protective
film which will burn off during the first few minutes of
use, this may cause a small amount of fuming. This
is quite normal – the fumes are non-toxic and will
quickly disappear.
We recommend that you open a window to ventilate
the room when using the heater for the first time.
Screen & Button sleep mode
If no buttons have been pressed for 20 seconds, the display
screen and buttons will enter sleep mode, all buttons except
the Standby will disappear. Selected screen icons will remain
visible to indicate the active mode but the brightness of the
screen icons will dim 50%. To reactivate buttons, place your
hand on the display.
The appliance will continue to function as required once the
unit is in sleep mode.
app. The icon
Fig. 6