Child Seat Functions
Chest Clip
Fastening the Chest Clip: Fasten the chest
clip by pushing the two halves together until
a positive click is heard (Fig. A).
Releasing the Chest Clip: Squeeze the
middle tab together and pull apart the two
pieces (Fig. B).
Adjusting the Chest Clip: Slide chest clip
up or down on harness so it is positioned at
the middle of the child's chest, level with the
child's armpits.
Harness Buckle
Fastening the Harness Buckle: Hold the
harness buckle with one hand. Use the other
hand to insert one buckle tongue at a time into
the harness buckle (Fig. C).
NOTE: Proper connection is confirmed with
an audible click after inserting each buckle
tongue.
Releasing the Harness Buckle
the rear of the harness buckle with one
hand. Press the release button and slide
both tongues to remove from the buckle
(Fig. D).
IMPORTANT: Periodically clean the harness
buckle to ensure safe operation. See pg 44.
36
A
b
: Brace
C
D
Adjusting Harness Slot Height
IMPORTANT:
See Important Harness Adjustments
on pages 6 – 7 for instructions on proper harness fit
based on your child's height and weight.
1
Loosen the harness by lifting the harness
adjuster lever while pulling both shoulder straps
forward as far as possible (Fig. E).
2
From the rear of the child seat, unhook the
shoulder harness from the harness yoke (Fig. F).
3
Pull straps through the shell, foam, and cover to
the front of the child seat.
4
Thread the harness straps through the
appropriate harness slots in the cover, foam,
and child seat shell (Fig. G).
5
Reattach harness straps to the harness yoke
(Fig. F).
6
Pull harness-adjuster strap to tighten the
harness.
7
Verify all straps are threaded at the same height
and are not twisted.
Child Seat Functions
E
F
G
37