OrienTek TPN-35 PON User Manual

TPN-35 PON Optical Power Meter User Manual
Products introduction
This PON power meter adopts a TFT high-definition
LCD display,it is designed for OLT equipment which is
foucs on online testing, it is very suitable for FTTx/
PON service adjustment or maintenance usage. It can
test and measure signal power for voice, data and
video connections. Allows you to quickly evaluate the
power level of the network, the USB port can transmit
data quickly,up to 1,000 measurement items can be
saved at one time, it is an indispensable tool for
construction and maintenance in the PON system, the
silicone protective cover can prevent accidental falls
drop or other damage.
ONT port OLT port
Auto shutdown icon
Wavelength
P/F key to enter
threshold page
Confirm button
TPN-35
Calibration
The meter will turn on after pressing the
1
" " key,press this key again for more
than two seconds to turn off the instrument.
2
Long press OK to enter the
calibration page,after calibration,
press OK to save.
Power supply battery
Numerical value
TFT HD LCD display
Press the P/F key to enter the threshold
Enter the threshold page
interface, if the value more than the value
set before,it will be showed in green,means
Data saving
pass, if it is close to the value set,then showing
Shut down button
in yellow,means warning,if less than the set
REF/dB key
value,it will be displayed in red,means failure.
TPN-35
Set threshold
Long press the TH key to enter the
threshold page,threshold setting
from large value to small value.
TPN-35
View threshold range
Clear threshold
In the shutdown state, first press the
TH button and then press the power
button,Clear the modified threshold and
return to the original factory setting valve.
TPN-35
TH
＋
TPN-35
TH
＋