Table of Contents
Advertisement
CPU Installation
Dram Installation
Install Expansion Card
Connect cable, wires &
power supplies
Bios Configuration
Clear CMOS
Bios Setup
Mother Board Configuration
CPU core speed
Pg.8-9
If
Then
Pg. 8-9
Pg.9
Please follow manufacturer instruction for any expansion card
installed.
Pg.
10-15
Refer to page 4 Fig. 2-1 to identify Pin No.1 connector on the
motherboard. (Black dot indicates Pin No.1).
Red line on the ribbon cable indicates Pin No.1.
Pg. 6
Short Pin 2-3 for 3 to 5 seconds on JBAT to clear CMOS.
Pg. 6
1. Turn on the computer.
2. Hold Down
computer.
3. Main Menu on Display (Pg. 15 Fig 3)
4. Select 'Standard CMOS Feature' and
press
5. Check and adjust date, time and Drive A/B configuration.
*We suggest you do not change the default setting unless you are very
well informed about all detail of the BIOS.
=
CPU Clock
=
Core / Bus ratio
=
CPU core speed =
key immediately after turning on the
Del
35
FSB
x
Ratio
100MHz
5
500MHz
Enter
Advertisement
Table of Contents
