Table of Contents
Advertisement
Setup
The system will boot, but access to Setup will be denied if the
correct password is not entered at the prompt.
Note: To disable security, select PASSWORD SETTING at Main Menu and then you will be asked
to enter password. Do not type anything and just press <Enter>, it will disable security. Once the
security is disabled, the system will boot and you can enter Setup freely.
OS Select For DRAM > 64MB: Select the operating system that is running with greater
than 64MB of RAM on the system.
The choice: Non-OS2, OS2.
3-3 ADVANCED CHIPSET FEATURES
This section allows you to configure the system based on the specific features of the installed chipset.
This chipset manages bus speeds and access to system memory resources, such as DRAM and the
external cache. It also coordinates communications between the conventional ISA bus and the PCI bus.
It must be stated that these items should never need to be altered. The default settings have been chosen
because they provide the best operating conditions for your system. The only time you might consider
making any changes would be if you discovered that data was being lost while using your system.
CMOS Setup Utility – Copyright © 1984 – 1999 Award Software
Bank 0/1 DRAM Timing
Bank 2/3 DRAM Timing
Bank 4/5 DRAM Timing
SDRAM Cycle Length
DRAM Clock
Memory Hole
P2C/C2P Concurrency
Fast R-W Turn Around
System BIOS Cacheable
Video RAM Cacheable
AGP Aperture Size
AGP-4X Mode
AGP Driving Control
X AGP Driving Value
K7 CLK_CTL Select
CPU to PCI Write Buffer
PCI Dynamic Bursting
PCI Master 0 WS Write
PCI Delay Transaction
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults
DRAM Timings: These settings deal with CPU access to dynamic random access memory
(DRAM). The default timings have been carefully chosen and should only be altered if data is being
lost. Such a scenario might occurs if your system had mixed speed DRAM chips installed so that
greater delays may be required to preserve the integrity of the data held in the slower memory
chips.
AGP Mode Select: This function allows you choose suitable AGP mode.
Advanced Chipset Features
SDRAM 10ns
SDRAM 10ns
SDRAM 10ns
3
Host CLK
Disabled
Enabled
Disabled
Enabled
Enabled
64MB
4X
Auto
DA
Optimal
Disabled
Enabled
Enabled
Disabled
Figure 3-5
18
Item Help
Menu Level
F7:Optimized Defaults
Advertisement
Table of Contents
