Operating Instructions - Tar River SSC-100 Operator's Manual

Fertilizer Spreader SSC-SSS-SP Series
Operation
It is important that each operator of the Tar River Fertilizer Spreader read and understand the operational pro-
cedures and all related safety precautions outlined in this section. The following checklist is provided for the
operator. It is important for both the personal safety and maintaining good mechanical condition that this check
list is followed.
Prior to operating the Fertilizer Spreader:
1. Make sure that the spreader is properly lubricated.
2. Check for damaged or missing parts.
3. Check that all hardware is tightened according to specifications (See Torque Chart page 23).
4. Remove any foreign objects from hopper.
5. Never allow anyone inside the hopper. Serious injury or death could occur.
6. Do not place hands or feet inside hopper with tractor running. Moving parts inside the hopper
can cause serious injury or death.
7. Make sure all guards are in place before operating spreader.
8. Clear the area of obstacles that can damage the spreader or cause uneven distribution of mate-
rial.
9. Clear the area of bystanders, especially small children and animals.
Caution: Never load hopper with material without first securing the spreader
to the tractor. Adding material to the hopper without first attaching it to the
tractor can cause the spreader to flip over causing serious injury or death.
Warning: Take necessary precautions when handling any chemical. Chemicals
can cause eye/skin irritation and or respiratory complications. Always wear
PPE (Personal Protection Equipment) gloves, eye protection, face mask, respi-
rator when filling the hopper. Refer to the chemical manufacturer's label for
all safety recommendations.
Warning: If a tractor with a cab is used it must be equipped with proper fil-
tration system or operator must wear a respirator cable of filtering toxic parti-
cles to prevent inhalation. Chemical particals can be harmful and possibly
deadly.

Operating Instructions

15