Page 2
Fertilizer Spreader PTS-100, PTS-160 Series Page left blank intentionally...
Page 3
Fertilizer Spreader PTS-100, PTS-160 Series TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Tar River dealer. Read manual in- structions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Owner’s/Operator’s Manual are completed before releasing equipment to the owner.
Fertilizer Spreader PTS-100, PTS-160 Series Table of Contents Introduction …………………………………………………………………………………………….. 5 Technical Specifications ……………………………………………………………………………….. 5 Safety …………………………………………………………………………………………………… 6 Safety Signal Words ……………………………………………………………………………………. 6 General Safety Guidelines ……………………………………………………………………………… 7 Safety Decal Care ………………………………………………………………………………………. 7 Before Operation ……………………………………………………………………………………….. 8 During Operation ……………………………………………………………………………………….. 9 Highway And Transport Operations ……………………………………………………………………...
Fertilizer Spreader PTS-100, PTS-160 Series Introduction Thank you for purchasing your Tar River Fertilizer Spreader. The PTS Series is a ground driven fertilizer spreader with steel gears engineered for everyday use. The adjustable tow bar allows the spreader to be used on multiple hitch height configurations.
Fertilizer Spreader PTS-100, PTS-160 Series Important Safety Information Safety It is important that you read the entire manual and to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification.
Fertilizer Spreader PTS-100, PTS-160 Series Important Safety Information General Safety Guidelines Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. De- signers and manufacturers build in as many safety features as possible. However, every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment.
Fertilizer Spreader PTS-100, PTS-160 Series Important Safety Information How to install Safety Signs: Be sure that the installation area is clean and dry. • Decide on the exact position before you remove the backing paper. • Remove the smallest portion of the split backing paper.
Fertilizer Spreader PTS-100, PTS-160 Series Important Safety Information During Operation Children should not be allowed on the product. • Clear the area of small children and bystanders before moving the feeder. • If using a towing unit, securely attach feeder by using a hardened 3/4” pin, a metal retainer, and safety •...
Fertilizer Spreader PTS-100, PTS-160 Series Important Safety Information Highway and Transport Operations Adopt safe driving practices. • Keep the brake pedals latched together at all times. Never use independent braking with machine in tow • as loss of control and/or upset of unit can result.
Page 11
Fertilizer Spreader PTS-100, PTS-160 Series Important Safety Information Highway and Transport Operations Maneuver the tractor or towing vehicle at safe speeds. • Avoid overhead wires or other obstacles. Contact with overhead lines could cause serious injury or death. • Avoid loose fill, rocks and holes, they can be dangerous for equipment operation or movement.
Fertilizer Spreader PTS-100, PTS-160 Series Assembly Instructions Assembly (See Fig. 1) 1. Begin assembly by sliding the threaded bushing (#6) through the bottom center hole of the hopper. Fasten the mobile shutter (#44) to it with the nut (#43). Make sure the slots in the mobile shutter are facing away from the bottom of the hopper.
Operating Instructions Operation It is important that each operator of the Tar River Fertilizer Spreader read and understand the operational pro- cedures and all related safety precautions outlined in this section. The following checklist is provided for the operator. It is important for both the personal safety and maintaining good mechanical condition that this check list is followed.
Page 16
Fertilizer Spreader PTS-100, PTS-160 Series Operating Instructions Attaching to the tractor Slide the spreader hitch over the tractor drawbar and secure with a pin. The spreader disc must be horizontal to spread material uniformly. Tilt is adjusted by removing the hardware connecting the side supports to the hitch and either raising or lowering the hitch (See Fig.
Page 17
Fertilizer Spreader PTS-100, PTS-160 Series Operating Instructions Loosen the Adjustment Knob (See Fig. 4) and slide the Adjustment Handle to the desired position and re-tighten. In the Center position, the spread pattern is approximately 180 degrees. In the LH most position, the spread pattern will be mostly 90 degrees to the right side of the spreader. In the RH most position, the spread pattern will be mostly 90 degrees to the left side of the spreader.
Page 18
Fertilizer Spreader PTS-100, PTS-160 Series Operating Instructions Spreading Width. Spreading width is directly affected by ground speed. The faster the ground speed, the further materi- al will be spread (See Fig. 6). An optional Deflector shield (Part Number PTS-001)is available to fur- ther control spreading distance.
Fertilizer Spreader PTS-100, PTS-160 Series Maintenance Danger: Never attempt to perform maintenance on the machine without first stop- ping the towing vehicle’s engine, setting the parking brake and removing the key from the ignition. Always wear the proper protection (PPE) when performing ser- vice.
Page 20
Fertilizer Spreader PTS-100, PTS-160 Series Maintenance After operating spreader: Wash the spreader thoroughly. This is extremely important especially after spreading corrosive materials • such as fertilizer or salt. These materials are highly corrosive and will eat away at metal parts.
Fertilizer Spreader PTS-100, PTS-160 Series Notes: This chart is an approximate estimate of torque values. Always tighten hardware to these values unless a different torque value or tightening procedure is listed for a specific application. Fasteners must always be replaced with the same grade as specified in the manual.
Page 22
Fertilizer Spreader PTS-100, PTS-160 Series Page left blank intentionally...
Page 23
Pull Type Fertilizer Spreader PTS-100, PTS-160 Parts Manual Rev. 12/21...
Fertilizer Spreader PTS-100, PTS-160 Series PTS-100, PTS-160 Deflector Shield (Optional)
Page 25
Tow Bar - Connector - Left RP02-000-22-00 Tow Bar - Connector - Right RP02-000-23-00 Bushing—Frame RP02-000-25-00 13” x 6” High Floatation Tire PTS-100 RP02-135006-2556 16” x 8” High Floatation Tire PTS-160 RP02-2556-1343 Wheel Bushing PTS-100/PTS-160 (not shown) BM061040 Bolt HH M6-1.00x40 BM061050 Bolt HH M6-1.00x50...
Fertilizer Spreader PTS-100, PTS-160 Series Warranty LIMITED WARRANTY Belco Resources Equipment warrants to the original purchaser of any new piece of machinery from Belco Re- sources Equipment, purchased from an authorized Belco Resources Equipment dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state, and mu- nicipalities’...
Page 31
Fertilizer Spreader PTS-100, PTS-160 Series Page left blank intentionally...
Need help?
Do you have a question about the PTS-100 and is the answer not in the manual?
Questions and answers